GP Systems has become a member of the FieldComm Group. FieldComm Group began operations on January 1, 2015 by combining all assets of the former Fieldbus Foundation and HART Communication Foundation. FieldComm Group is a global standards-based non-profit member organization consisting of leading process end users, manufacturers, universities and research organizations that work together to […]
About CiA CAN in Automation (CiA) is the international users’ and manufacturers’ group for CAN (Controller Area Network), internationally standardized in the ISO 11898 series. In 1992, the nonprofit association has been established. The aim is to provide an unbiased platform for future CAN-related specifications and standards. Established in March 1992, the CiA nonprofit association […]
PROFIBUS is a standardized, open, digital communications system for all areas of application in manufacturing and process automation. PROFINET is the innovative open standard for Industrial Ethernet. It satisfies all requirements of automation technology. About PI PROFIBUS & PROFINET International (PI) is the world’s leading industry association, the active Community for the standardization and dissemination […]
Configuration of HART Protocol in Redul PLC This tutorial contains information on setting up data transfer using the HART protocol on the Redul BX00 series industrial logic controllers. Setup will be done using the Sigma LD software. Getting Started Install the Sigma LD software on the computer. A description of the program installation process, as […]
GP Systems GmbH is now a registered member of the FDT Group. The group develops and promotes standards for communication with the field devices using common approach and same software, removing the complexities of communications, connections, interfaces. The technology, proposed by the FDT Group, was to make configuration of the field equipment independent from the […]
We have started working on a module based on the FDT (Field Device Tool) 2.0 specification. It enables communication and configuration of the field devices of various manufacturers in a streamlined and standard way. FDT, in a way similar to operation of the drivers on the PC for the peripherals uses integrated device drivers (DTM […]
Working With MySQL Databases in Redul PLC This tutorial contains information on working with the MySQL database available in the selected Redul programmable logic controllers. Introduction From a REDUL PLC you can connect not only to the local MySQL database, running on the controller itself, but also to a MySQL database located in the local […]
Seting up Virtual Programmable Logic Controller (Redul BX00) This tutorial contains information on configuring and using a virtual Redul PLC. Images of the controllers could be downloaded from our website in the Support – Downloads section. Introduction General Information The Redul controller image allows you to use it without an actual controller hardware on hand. […]
Configuration of Modbus RTU and Modbus TCP in Redul PLC This tutorial contains information on setting up Modbus communication on the Redul BX00 programmable logic controllers. Setup is done using Sigma LD software. Introduction General Information The Redul controller software allows you to configure it both as a Modbus Master and as a Modbus Slave. […]
Configuration of OPC UA in Redul PLC The REDUL OPC UA server provides developers with instruments to read and write access to data from IEC applications running on Redul BX00 series programmable logic controllers. Transferring Various Data Types Organization of Server Address Space The server displays in its address space both data and data types. […]
